Saniclean

  • Effectively removes odors and flavors especially from draft lines or other dispensing products.
  • Great for both CIP and manual applications.
  • Not to be used on soft metals such as aluminum.

Available in 32 oz, 1, 5, 15 and 55 gallon sizes.

Other ways to shop

Please click below and find your local retailer to purchase.

Shop Local
  1. Thoroughly clean surfaces with PBW or compatible cleaner.
  2. Mix  1 oz. Saniclean for every 3 gal. of water. (Will be low-foaming)
  3. Apply on surface with cloth, mop, sponge, spray, or immersion. 
  4. If using spray application, use a coarse mist, pump, or trigger sprayer and spray 6-8 inches from surface and follow up with a brush or sponge.
  5. Allow for contact time of at least 2-3 minutes.
  6. Drain, but do not rinse.
View and download Safety Data Sheets (SDS)
pdf
(Size: 183.4 KB)
View and download Spec Sheets
pdf
(Size: 699 KB)