JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Acid #5

Specially formulated to passivate and re-passivate stainless steel.
Low-foaming designed to attack beer stone and scale.

Available in 1, 5, 15, and 55 gallon sizes.

Other ways to shop

Please click below and find your local retailer to purchase.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Acid #5

Acid Rinse

Make solution of 1 oz. per 10 gallons of water.
Circulate the solution for 15-20 minutes at a temperature of 50°-140°F
Drain, rinse, and sanitize before use.

Acid Wash

Make solution of 1 oz. per 1 gallon of water.
Circulate the solution for 15-20 minutes at a temperature of 50°-140°F
Drain, rinse, and sanitize before use.

Initial Acid Passivation

After cleaning vessel, make a solution of 5 oz. of Acid #5 to 1 gallon of water.
Circulate for 15-20 minutes at a temperature of 120°F.
Drain vessel and ALLOW TO AIR DRY.
Vessel must air dry in order to achieve successful passivation.
After letting equipment air dry, rinse before sanitizing.
Sanitize before use.

Repassivation

After cleaning vessel, make a solution of 1 oz. of Acid #5 to 1 gallon of water.
Circulate for 30 minutes at a temperature of 120°F.
Drain vessel and ALLOW TO AIR DRY.
Vessel must air dry in order to achieve successful passivation.
After letting equipment air dry, rinse before sanitizing.
Sanitize before use

SDS & Resources

View and download Safety Data Sheets (SDS)

(Size: 417.3 KB)

View and download Spec Sheets

(Size: 635.4 KB)